Flexible hybrid electronic (FHE) promises to combine the functionality of conventional rigid electronics with the flexibility of printed electronics. A prototypical FHE circuit, in which an integrated circuit is combined with multiple other elements, includes (for example) printed sensors, an antenna, a thin film battery and even thin film PV. Not all components need to be included, or even printed, for a circuit to count as FHE, but it must include as a minimum both printed and placed functionality.

IDTechEx will be hosting a free webinar on Thursday 7 May 2020. Where Is the Future of COVID-19 Diagnostics? will be presented by IDTechEx Technology Analyst, Dr Luyun Jiang.

IDTechEx will be hosting a free 30-minute webinar on Wednesday 29 April 2020. Miniaturised Gas Sensors for Environmental Monitoring will be presented by IDTechEx Technology Analyst, Dr Luyun Jiang.

While flexible electronics have been around for years, either as flexible PCBs or genuinely printed electronics, there has always been a trade-off between flexibility and capability. A new report from IDTechEx discusses the innovation trends, opportunities and challenges in the FHE market.

Conductive ink business is inherently wonderfully diverse, which has allowed the industry to rejuvenate itself time and again and to remain relevant through generations of product lifecycles. This diversity, however, presents a market segmentation, evaluation, and prioritization challenge for many small and large players across the world.

The new IDTechEx report, "Zero-Emission Electric Vehicle Charging: Off-Grid 2020-2040" examines how the electric vehicle business is finding it profitable to respond to criticism that clean vehicles should not be charged with fossil fuel electricity.

Artificial intelligence is revolutionizing medical diagnostics. This is a ground-breaking development with far-reaching consequences. Naturally, many innovators are scrambling to capitalize on these advancements.

XR is a term which has become more prominent in the last few years. It encapsulates virtual, augmented, and mixed reality topics. The definition of each of these has become saturated in the past decade, with companies using their own definitions for each to describe their products.

In the past decade, mobility-as-a-service (MaaS) has attracted significant attention as it holds the potential to disrupt the business model of the traditional automotive industry and the way people travel.

The electric vehicle market is growing rapidly, and with it the demand for fast charging, increased energy density and improved safety. Something that all these areas have in common is heat. Charging a battery quickly generates a lot of heat, with the extra energy capacity of modern and upcoming electric vehicle batteries, extracting this heat becomes more challenging.

The EV market is booming. The battery is a key feature for both cost and performance, the chemistry and cell levels are extensively discussed. However, everything else that goes into a pack is often overlooked.

Microelectromechanical systems (MEMS) and screen-printing techniques open the door to miniaturised gas sensors and enable the integration of such gas sensors into many consumer devices, such as mobile phones and wearable devices.

The lidar market is very dynamic and some players are making excellent progress towards launching automotive-grade products. Analysts at IDTechEx are tracking more than one hundred companies that develop 3D lidar modules, this article presents insights from their report "Lidar 2020-2030".

IDTechEx attended AutoSens 2019 in Brussels. The event took place at the car museum in Brussels. This event is focused on all future vehicle perception technologies including lidar, radar, and camera. It focuses on the hardware side as well as on the software and data processing side.

Masterclasses are the ideal way to train staff on emerging technologies. Bracketing the IDTechEx show in Berlin, the IDTechEx masterclasses on 12th and 15th May 2020 will contain the latest insights and analysis on their chosen topics.

In 2020 the market for conductive inks will be $2.4Bn, according to extensive research by IDTechEx. Of that, 95% of the conductive ink supply by value goes into just three applications. However, for years now there has been work on a myriad of new applications for conductive ink, in this article we assess some of those opportunities.

The rise of electric vehicles is creating many new material opportunities. One such material class is the die attach material used in power electronics.

There is dramatic change in some industries, with leading printed electronics vendors moving quickly to capitalize on the new sought after capabilities. These opportunities will be addressed at the Printed Electronics Europe exhibition and conference in Berlin on 13 - 14 May (register by 23 January to save 40%).

Diagnosing CVD is the first step in patients' road to recovery. It is imperative to detect the disease early in order to administer treatment while it is still treatable. In addition, preventing the disease altogether is becoming more important in healthcare. The main approaches for detecting CVD are currently in vitro diagnostics (IVD) at point-of-care (POC) and the use artificial intelligence (AI) in cardiovascular imaging.

Thermal interface materials (TIM) play a crucial role in numerous sectors, from lithium-ion batteries to 5G base stations, LEDs, consumer electronics and more. Heat dissipation is often on the of the limiting factors as many industries look to increase power and reduce the size.